1.Stable Foundation: Ensure level and compact ground. Use sole plates or base plates to distribute loads where necessary, preventing settlement or tilting.
2.Material Inspection: Check all components for damage, deformation, or corrosion before installation. Replace non-compliant materials promptly.
3.Standardized Assembly: Strictly follow design drawings and specifications. Ensure correct installation of vertical standards, horizontal ledgers, and diagonal braces, with all connections fully tightened.
4.Alignment Control: Use spirit levels and plumb bobs to verify vertical standards and level ledgers, preventing structural leaning or distortion.
5.Fall Protection: Install guardrails, toe boards, and safety nets to prevent falls of personnel/materials. Working platforms require fully decked scaffold boards; prohibit overhanging planks.
6.Load Management: Prohibit overloading. Ensure uniform load distribution to avoid localized overloading causing collapse.
7.Inspection Protocol: Conduct post-installation acceptance checks for safety compliance. Perform periodic inspections during use and address loosening/deformation immediately.
8.Qualified Personnel: Installers must hold valid certifications with relevant skills and safety knowledge.
9.Weather Constraints: Halt installation during severe conditions (e.g., high winds, rain, snow) to prevent slips or structural instability.
10.Emergency Preparedness: Establish response plans for rapid reaction to incidents, minimizing losses.
Post time: 2025-07-16 14:04:03