1. Key Standards for High-quality Scaffolding Selection
Welded joints: All discs and accessories are welded to steel pipes. Qualified products feature full and smooth welds to ensure structural stability.
Support steel pipes: Inspect steel pipes for bending, deformation and damage, and reject defective pipes to avoid structural risks.
Pipe wall thickness: Verify the wall thickness of steel pipes and discs through standard labeling and testing methods to judge overall product quality.
2. Standard Erection Requirements
Professional technicians shall formulate a standardized erection scheme in advance. Construction workers shall erect the scaffold strictly from bottom to top in the sequence of vertical poles, horizontal ledgers and diagonal braces.
3. On-site Construction Specifications
All construction operations must comply with industry standards, and overload use is strictly prohibited. Operators shall wear complete safety protective equipment and running on working platforms is forbidden. Erection work shall be suspended in strong wind, thunderstorm and rainy weather.
4. Dismantling Specifications
Dismantling shall follow the reverse sequence of erection with unified on-site planning. All components shall be handled gently without throwing, and disassembled parts shall be stacked neatly on site.
5. Standard Storage Management
Scaffolding components shall be classified and stored in dry, ventilated areas far away from corrosive substances to extend service life and maintain stable performance.
Post time: 2026-05-29 09:08:45