I. The Secret of Ringlock Scaffolding's Bearing Capacity
The bearing capacity of ringlock scaffolding is affected by material quality and structural design, not a fixed value. Generally, it can bear about 6–8 tons per square meter, or 2–3 tons per square meter in common construction load indicators. However, bearing capacity varies with manufacturers’ material selection, production process and structural design, so specific product parameters should be referred to in application.
II. Key Points to Ensure Ringlock Scaffolding Erection Safety
1. Height Limit and Special Design
The basic safe erection height shall not exceed 24 meters. For heights beyond this limit, special design and calculation by professional technicians are required. If wall ties cannot be set at the bottom temporarily, add multiple rows of external scaffolding and diagonal poles to form a temporary stable structure, which can be removed after upper wall ties are installed.
2. Refined Installation of Protective Facilities
Install toe boards, protective railings and dense mesh safety nets on the outer side of the working layer. The protective railing shall be 1000mm above the working surface, the toe board height shall not exceed 180mm, and the dense mesh safety net shall prevent falling of personnel and materials.
III. Summary and Suggestions
Bearing capacity and safety requirements are core principles of ringlock scaffolding. In actual use, refer to product specifications and relevant standards, and conduct regular maintenance and inspection to find and repair wear and deformation. Mastering these knowledge helps suppliers provide professional services and practitioners ensure construction safety and quality.
Post time: 2026-04-17 09:02:40